steelguard
PRODUCT DESCRIPTION
Promac Steelguard™ liquid galvanised coating is a single pack matt zinc rich primer and / or final coat which gives outstanding corrosion resistance due to cathodic protection.
PRODUCT BENEFITS
One component coating ready for use
Can be applied by brush, roller or spray technique
High resistance to corrosion in saline environment
Recommended for long term protection of steel corrosive material
Based on sacrificial mechanism of corrosion protection targeting reactive zinc corrosion instead of iron
SPREADING RATE
This product will cover approximately 2.5 m² per kg.
APPLICATION
Apply one coat Promac Steelguard™ by brush, roller or spray. To be used in a ventilated area. Stir well with a flat paddle or a paddle mixer drill bit until homogenous mass is achieved. The thickness should be adapted according to standard galvanising ASTM-A123 WFT: 75-100 µm, DFT: 25-35 µm at a spreading rate of 2.5 m² per kg. Ambient air affects and determines the drying process, so the time will vary according to the humidity level & temperature.
CLEANING
Clean all brushes/rollers after use with mineral turpentine and while still wet.
SIZES
1L & 2,5L
STANDARD COLOURS
DOCUMENTATION