01 Stain & Seal

PRODUCT DESCRIPTION

Promac Yes!™ Wood 01 Stain & Steel is a water based, medium gloss stainer and sealer that protects and enhances interior and exterior wood. Application only suited to new or sanded wood surfaces.

PRODUCT BENEFITS

UV resistant
2-in-1 stainer and sealer
Excellent adhesion
Non-hazardous
Low odour
water based, quick drying
easy application and clean up
Non-yellowing

SPREADING RATE

This product will cover approximately 7-9 m² / litre per coat depending on the type of substrate and the surface porosity.

APPLICATION

Thoroughly clean and prepare all surfaces by removing all dust, dirt, oil, grease, grime and flaking paint. Previously stained, treated or weathered wood must be sanded down to raw wood. Using a quality brush, roller, sponge or spray gun, apply 1-3 even coats. A light sanding between coats is recommended. Allow 4 hours drying time between coats. Allow at least 12 hours to cure. Important: Shake well before use. Do not apply in direct sunlight. Not suitable for wooden floors and decks.

CLEANING

Clean all brushes, rollers and spray equipment while still wet with water.

SIZES

1 L

COLOUR