PVA COATING
PRODUCT DESCRIPTION
Promac Ecoat PVA is a decorative acrylic paint for interior use. May be used as a filler coating under medium quality acrylic paints on interior walls and ceilings over suitably prepared surfaces.
PRODUCT BENEFITS
• Lead free
• Smooth, matt finish
• Easy to apply
• Water clean-up
SPREADING RATE
This product will cover approximately 6-8 m² per litre per coat depending on the type of substrate, surface porosity and application method.
APPLICATION
Apply this product with a paint brush or suitable roller to smooth surfaces and use a quality synthetic long pile paint roller on rough / coarse surfaces. Always allow at least four hours of drying time between coats. This product is ready for use, thinning is not required.
CLEANING
Clean all tools (brushes & rollers) after use with water and while still wet.
SIZES
5L
STANDARD COLOURS
Colour Disclaimer: Colours are only as accurate as your display can reproduce it. For your actual paint colours, please refer to our colour charts and in-store colour displays
DOCUMENTATION
Download Technical Data Sheet here
Download Safety Data Sheet here
RECOMMENDED PRODUCTS:
PLASTER
PRIMER
SOLVENT BASED
Promac Plaster Primer is a new generation solvent based, alkali resistant plaster primer which has excellent adhesion, binding power and water / weather resistance for interior / exterior areas. It is meant for application to both uncoated new work and weathered / previously painted areas.